Here’s one you don’t see everyday. Superior fine gold recovery machine. Full length (5′ x 2) over/under sluice box 20″ wide = 10 feet of sluicing. Two grizzlies (classifiers) the lower allowing 3/16″ and finer material to drop down into the lower riffles, the upper, 1/4″ woven wire classifier for the top box. Sluice is adjustable in a couple of ways, the aluminum tray separating upper and lower boxes can be moved forward as much as needed for proper water flow (gold recovery). and both boxes can be moved forward or backward on a sliding carriage to achieve proper recovery angle.
Electric starting Honda GX390 (13HP) engine, new battery, new spark plug, new oil, Handle-Up oil drain kit, new air filter, new compressor drive belt.
Keene P-350 water pump with oversize impeller (5 1/2″) with new pump seal, capable of pumping 5-600 GPM, (gallons per minute). Gast PCA-10 dual cylinder air compressor supplies air for multiple divers, new pressure relief valve. Adjustable relief valve set to ‘pop-off’ at 80 PSI. Also set up with snorkel, oversize reserve tank, 30′ air hose, harness, regulator, and quick disconnect fittings.
New 20′ suction hose, new pressure hose with cam locks and heavy duty spiral hose clamp on swivel nozzle.
A nice, complete dredge ready for fine gold recovery. All equipment has been tested for proper functionality.
Shipping available for additional charge. Dredge is located in the Sacramento area.
$6,500.00